KiCad PCB review record — Free BoardPort guide
Updated: 2026-09-14
https://boardport.signalandship.com/kicad-pcb-checklist
https://boardport.signalandship.com/kicad-drc-errors

Fill this blank record locally. It does not run design checks or approve fabrication.
Every item starts as NOT REVIEWED. Retain evidence for REVIEWED and a reason for NOT APPLICABLE.
Saved notes may contain design-derived information; check the recipient before sharing.

Design / revision:
Review date / reviewer:
KiCad version / OS:
Board file:
Project / schematic / custom rules / required libraries:
Fabricator / process / specification URL, revision and date checked:

Workflow review
1. Project and design revision: NOT REVIEWED
2. Schematic/ERC, symbol/footprint and pin/pad relationship: NOT REVIEWED
3. Stackup, constraints, net classes and fabrication requirements: NOT REVIEWED
4. Zone refill, DRC, excluded findings and disabled rules: NOT REVIEWED
5. Required Gerber layers, outline, drill output and viewer inspection: NOT REVIEWED
6. Open items and decision about proceeding to fabrication: NOT REVIEWED

Repeat the following for each item
Item ID / finding message:
State (NOT REVIEWED / OPEN / REVIEWED / NOT APPLICABLE):
Reference / pad / net / layer / location:
Intended state:
Required value / measured value / units / applicable rule and source:
Run settings / zone state / exclusions or disabled rules and reasons:
Command (only if run) / exit status / report filename:
Evidence (identify the design and output revision):
Correction / corrected revision:
Recheck date / settings / result / report:
Open question / owner / next check:
Decision / date / reviewer:

Output revision and file inventory to send for fabrication:
Remaining open items:
Fabrication requirements checked and decision evidence:

The paid BoardPort tool compares supported EAGLE/KiCad file pairs.
This record, a clean DRC report or a comparison PASS does not certify manufacturability or circuit behavior.