BoardPort Audit · deterministic local report
COMPLETED
Product 0.1.0-rc.1 · Engine 0.1.0 · Rules boardport-rules-0.2
PASS0
DIFF3
NOT CHECKED0
PAD_NET_MAPPINGDIFF2 pad-to-net difference(s) require review.
- Net changed: U1 pad 2 · EAGLE=VCC · KiCad=GND
- Destination-only pad mapping: U2 pad 1 → GND
Next action: Review every listed difference against the source design before using the migrated board.
FOOTPRINT_REFERENCE_SETDIFF1 footprint-reference difference(s) require review.
- Destination-only footprint reference: U2
Next action: Review every listed difference against the source design before using the migrated board.
BOARD_OUTLINE_AND_ROUTING_LAYERSDIFFA routed-layer count or comparable outline property differs.
- DIFF: routed segment count on F.Cu · EAGLE=1 · KiCad=0
- DIFF: outline signature · EAGLE=4 segments · 10 × 5 mm · simple closed · KiCad=4 segments · 11 × 5 mm · simple closed
Next action: Review every listed difference against the source design before using the migrated board.
Warnings
None.
Scope and limits
- Read-only comparison: neither input file is modified.
- PASS applies only to the stated rule and supported input profile. It is not a circuit, safety, ERC, DRC, Gerber, manufacturability, or engineering certification.
- The saved report can contain design-derived references, pad numbers, net names, and differences. Treat the report as confidential when sharing it.
- BoardPort product code makes no network request. Browser, operating-system, extension, and security-software traffic is outside the product boundary.